09 December, 2011

CONCLUSION: IT WORKS.










In this images can be seen how the system works. All the rolling and pitching is redirected to act like an horizontal and forward motion. In a calm, the rudder acts like an oar, or to acelerete the boat under several circumstances.

Under ideal conditions, five to six knots can be achieved, and this is about the speed hull limit. I did several miles using it, trying and experimenting, changing shapes and saving errors. If a good research is done, I think the better results can be achieved to do this a primary propulsion for any boat.

Another thing, is all of the drawbacks for a planning hull when trolling, results this way a benefit. We need motion of water, eddies, turbulence, etc. and convert it in propulsion.

I hope this can be a good aport about the wave propulsion, for funny or other finality. Anybody can feel free to contact me and exchange opinions about the use of this in any kind of hull.






29 August, 2011

Toughts.

Now working in the under hull fins. This will give me a better speed in knots- specially when the waves period is  too big. If I will pass Gibraltar I need to do it in september.

14 December, 2010

WAVE PROPULSION.



The idea is simple: to propulse a boat we need an oar and a boat, applying force to the oar we have the motion. But, what happen if the force is applied to the boat by the waves? Lots of smart people still working in develop fins, doing equations, investing money and time, having masters and titles..............Don't be smart, just modest and humble is much better to learn and found solutions. I have a tender boat, and a sculling oar astern, that's it.



After a couple of months experimenting I can say now this thing works. I will need some changes in the final shape and materials, increase proportions and a new adjustement to gain in speed. The principle is very easy to understand: something like a japanese ro -chinese yuloh in the original idea- where the blade is changed to a vertical position and the loom still fixed at the centerline with a bungee cord.



The original device I did using pvc pipes -too much flexibles-, some plywood and epoxy for the blade. This one bring-me 4knots with one meter waves, bad because don't works very well windward, also the result was after increase the pvc pipes in diameter.



Next: I will use different and definitive materials. I hope to sail a bit before summer.

Note: Thanks to Douglas Brooks http://thesabaniproject.blogspot.com/ to help by sending me his article about japanese ro oar.

22 August, 2010

NOTHING EASY




I still having some delays, cause I don't found yet nobody capable to pick'n up NA-Y to the water, close here. I have not a gps, compass and some safety stuff as well. But anyway, I will sail, I think in one or two days. While testing the wave propulsion device I will post some picks and then measures, complete design, proportions, etc.. The important matter here is to demonstrate how to sail using this device is safe and reliable. I hope to exceed the five knots in the first attempt.
So, that traditional eye are almost all my protection.

04 August, 2010

MULTIFUNCTION, an easy way.



We need, normally, an steering system, an auxiliary oar and a propulsion system. What if we use all toguether, in the same system? Is nothing complex, if we try to sintetyze.

The chinese yuloh can be modified for this purpose. The blade can be done vertical and the arm flexible, so this way we have all the system and is too simple. Simpler is smarter, if it works.

The blue shark tail size is something like the half of his lenght, and in the red tuna we can talk about one third. The difference is this shark's shape is trimmer like a narrow planning hull and the tuna looks more like a displacement hull, but the both reaches fast speeds. This bring idea about the lenght of the oar's blade.